Delphi TC1626 Suspension Ball Joint

Delphi TC1626 Suspension Ball Joint

Features:

Ball joints utilize chloroprene rubber boots which improves durability, preventing premature failure
Anti Corrosion protection applied to each part for optimum corrosion prevention and enhanced aesthetics
Delphi ball joints manufactured with high quality forgings for increased strength and smooth operation
Delphi machines to micron tolerances to guarantee durability and smooth joint operation

Delphi’s OE safety technology is fitted to millions of vehicles worldwide and we apply Delphi’s OE expertise to our aftermarket steering portfolio. Delphi tests to the extreme for OE performance at every turn: our parts withstand temperatures below -40 degrees C and over 120 degrees C and are exposed to 720 hours of salt spray. Delphi’s extensive dimensional and material analysis ensures the very best compatibility between the OE and aftermarket part.

Attributes:

Maximum Outside Diameter	2.165 IN
Dust Boot Included	Yes
Position(s)	Front Lower
2334	Yes
2381	Yes
2827	Yes
881	Threaded
9090	Rubber
9204	No
9209	No
9210	Yes
Cotter Pin Hole	Yes
Mounting Hardware Included	Yes
Washers Included	Yes
Adjustable	No
Greaseable	No
Maximum Outside Diameter	55.00 MM
Length	103.12 MM
Length	4.060 IN
Width	55 MM
Height	4.055 IN
Height	67.00 MM
Mounting Type	Press-In
Suspension Grade Type	Standard Replacement
9213	19.8 MM
9213	0.78 IN
9212	16.3 MM
9212	0.642 IN
9211	0.167 IN
Material	Ball Material – Alloy Steel SAE 5140, Housing Material – Carbon Steel SAE 1040
Color	Gray
Grease Fitting Included	No
Bushings Included	No
4966	25.5 MM
4966	1.004 IN