Delphi TC1627 Suspension Ball Joint

Delphi TC1627 Suspension Ball Joint

Features:

Ball joints utilize chloroprene rubber boots which improves durability, preventing premature failure
Anti Corrosion protection applied to each part for optimum corrosion prevention and enhanced aesthetics
Delphi ball joints manufactured with high quality forgings for increased strength and smooth operation
Delphi machines to micron tolerances to guarantee durability and smooth joint operation

Delphi’s OE safety technology is fitted to millions of vehicles worldwide and we apply Delphi’s OE expertise to our aftermarket steering portfolio. Delphi tests to the extreme for OE performance at every turn: our parts withstand temperatures below -40 degrees C and over 120 degrees C and are exposed to 720 hours of salt spray. Delphi’s extensive dimensional and material analysis ensures the very best compatibility between the OE and aftermarket part.

Attributes:

9090	Rubber
881	Threaded
Material	Ball Material – Alloy Steel SAE 5140, Housing Material – Carbon Steel SAE 1040
Color	Gray
Grease Fitting Included	No
Bushings Included	No
Dust Boot Included	Yes
Cotter Pin Hole	Yes
Mounting Hardware Included	Yes
Washers Included	Yes
839	19mm
Mounting Hole Quantity	4
Adjustable	No
Greaseable	No
Mounting Type	Bolt-In
Suspension Grade Type	Standard Replacement
9213	0.953 IN
9213	24.2 MM
Height	114.00 MM
Height	4.488 IN
Width	105 MM
Maximum Outside Diameter	83.00 MM
2827	Yes
2381	Yes
2334	Yes
Position(s)	Front Lower
Maximum Outside Diameter	3.268 IN
9210	Yes
9209	No
9204	Yes
9212	19.53 MM
9212	0.769 IN
9211	0.167 IN
9207	1.180 IN
9207	30.00 MM
9203	21.00 MM
9203	0.827 IN
9202	0.470 IN
9202	12.00 MM
4966	29.01 MM
4966	1.142 IN
3068	40.00 MM
3068	1.575 IN