Delphi TC409 Suspension Ball Joint

Delphi TC409 Suspension Ball Joint

Features:

Delphi machines to micron tolerances to guarantee durability and smooth joint operation
Anti Corrosion protection applied to each part for optimum corrosion prevention and enhanced aesthetics
Ball joints utilize chloroprene rubber boots which improves durability, preventing premature failure
Delphi ball joints manufactured with high quality forgings for increased strength and smooth operation

Delphi’s OE safety technology is fitted to millions of vehicles worldwide and we apply Delphi’s OE expertise to our aftermarket steering portfolio. Delphi tests to the extreme for OE performance at every turn: our parts withstand temperatures below -40 degrees C and over 120 degrees C and are exposed to 720 hours of salt spray. Delphi’s extensive dimensional and material analysis ensures the very best compatibility between the OE and aftermarket part.

Attributes:

Mounting Hole Quantity	3
Adjustable	No
Greaseable	No
Mounting Type	Bolt-In
Bushing Quantity	0
Suspension Grade Type	Standard Replacement
9058	44.00 MM
9202	10.00 MM
9210	Yes
9213	15.5 MM
9202	10.50 MM
9202	0.410 IN
9202	0.390 IN
9203	16.00 MM
9203	19.60 MM
9203	0.770 IN
3068	35.00 MM
9203	0.630 IN
3068	36.40 MM
3068	1.430 IN
Height	84.00 MM
9207	22.00 MM
9207	30.00 MM
9207	0.870 IN
9207	1.180 IN
9212	0.709 IN
9212	18 MM
9213	0.61 IN
9209	No
9204	Yes
9090	Rubber
881	Threaded
2827	No
2381	Yes
2334	No
Position(s)	Front Lower
Maximum Outside Diameter	1.693 IN
Maximum Outside Diameter	43.00 MM
Width	70 MM
Height	3.307 IN
3068	1.380 IN
4966	0.76 IN
4966	19.3 MM
9058	35.00 MM
Material	Ball Material – Alloy Steel SAE 5140, Housing Material – Carbon Steel SAE 1040
Color	Silver
Grease Fitting Included	No
Dust Boot Included	Yes
Type	Premium
Cotter Pin Hole	No
Mounting Hardware Included	Yes
Washers Included	Yes