Gates 20416 Premium Molded Coolant Hose
Features:
- Caution: Do not use for fuel or oil transfer applications
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube; synthetic fiber knit reinforcement; heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Our Molded Coolant Hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, money and energy from going to your OE dealer for radiator hose replacements. Gates’ molded coolant hose line is the most comprehensive line on the replacement market.
Attributes:
| 9839 | Yes |
| Length | 20.6 |
| Material | EPDM |
| Connection diameter: | 1.5 |
| Number of Branches | 0 |
| Length | 523 |
| Connection diameter: | 38 |
| 9940 | No |
| 9845 | 0 |
| 2027 | No |
| Inside Diameter | 38 |
| Inside Diameter | 1.5 |
Vehicle Applications:
| Make | Model | Years |
| to | ||
| Buick | 1967 to 1967 | |
| Checker | 1970 to 1979 | |
| Chevrolet | 1955 to 1970 | |
| DeSoto | 1957 to 1957 | |
| Dodge | 1957 to 1966 | |
| Edsel | 1958 to 1958 | |
| Fargo | 1961 to 1966 | |
| Ford | 1969 to 1973 | |
| Jeep | 1950 to 1962 | |
| Lincoln | 1968 to 1969 | |
| Mercury | 1969 to 1971 | |
| Oldsmobile | 1952 to 1960 | |
| Plymouth | 1957 to 1966 | |
| Pontiac | 1955 to 1970 |
| Weight | 0.417 kg |
|---|
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.