Gates 20662 Premium Molded Coolant Hose
Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube; synthetic fiber knit reinforcement; heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
Our Molded Coolant Hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, money and energy from going to your OE dealer for radiator hose replacements. Gates’ molded coolant hose line is the most comprehensive line on the replacement market.
Attributes:
| Connection diameter: | 15 |
| 9940 | No |
| 9845 | 0 |
| Number of Branches | 0 |
| Length | 132 |
| Length | 5.2 |
| Connection diameter: | 0.61 |
| Inside Diameter | 0.61 |
| Inside Diameter | 15 |
| 9839 | Yes |
| 2027 | No |
| Material | EPDM |
Vehicle Applications:
| Make | Model | Years |
| to | ||
| Audi | 1980 to 1981 | |
| Bricklin | 1974 to 1976 | |
| Buick | 1988 to 1991 | |
| Cadillac | 2004 to 2010 | |
| Chevrolet | 1988 to 1988 | |
| Ford | 1969 to 2001 | |
| Laforza | 1989 to 1990 | |
| Lincoln | 1977 to 1992 | |
| Mercury | 1969 to 2001 | |
| Nissan | 1984 to 1989 | |
| Oldsmobile | 1988 to 1991 | |
| Pontiac | 1988 to 1988 |
| Weight | 0.05 kg |
|---|
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.