Gates 21353 Premium Molded Coolant Hose
Features:
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Caution: Do not use for fuel or oil transfer applications
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- EPDM tube; synthetic fiber knit reinforcement; heat-, ozone- and chemical coolant-resistant EPDM cover
- Pre-shaped to fit and to ensure perfectly sealed conditions
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Specifically-engineered materials resist collapse under vacuum
Our Molded Coolant Hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, money and energy from going to your OE dealer for radiator hose replacements. Gates’ molded coolant hose line is the most comprehensive line on the replacement market.
Attributes:
| 9940 | No |
| Inside Diameter | 33 |
| Material | EPDM |
| 9839 | Yes |
| Length | 12.2 |
| Inside Diameter | 1.31 |
| 2027 | No |
| Length | 310 |
| Connection diameter: | 33 |
| Connection diameter: | 1.31 |
| Number of Branches | 0 |
| 9845 | 0 |
Vehicle Applications:
| Make | Model | Years |
| Buick | 1983 to 1986 | |
| Mazda | 1989 to 1994 | |
| Nissan | 1982 to 1984 | |
| Oldsmobile | 1983 to 1986 | |
| Pontiac | 1983 to 1986 |
| Weight | 0.236 kg |
|---|
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.