Gates 21592 Premium Molded Coolant Hose
Features:
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube; synthetic fiber knit reinforcement; heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
Our Molded Coolant Hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, money and energy from going to your OE dealer for radiator hose replacements. Gates’ molded coolant hose line is the most comprehensive line on the replacement market.
Attributes:
| Length | 366 |
| Inside Diameter | 1.25 |
| 9839 | Yes |
| 9845 | 0 |
| Inside Diameter | 32 |
| Material | EPDM |
| Number of Branches | 0 |
| 2027 | No |
| Connection diameter: | 1.25 |
| Length | 14.4 |
| Connection diameter: | 32 |
| 9940 | No |
Vehicle Applications:
| Make | Model | Years |
| Buick | 1987 to 1989 | |
| Chevrolet | 1987 to 1991 | |
| Dodge | 1992 to 1992 | |
| Eagle | 1992 to 1996 | |
| INFINITI | 2004 to 2010 | |
| Mitsubishi | 1992 to 1994 | |
| Nissan | 2004 to 2012 | |
| Oldsmobile | 1987 to 1988 | |
| Plymouth | 1992 to 1992 |
| Weight | 0.254 kg |
|---|
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.